Product Details Melting point 160-163 °C(lit.) Boiling point 400°C density 1.3837 (estimate) vapor pressure 0Pa at 20℃ Fp >100°C storage temp. Inert atmosphere,Room Temperature solubility DMSO (Slightly), Methanol (Slightly) pka 8.74±0.10(Predicted) form powder color White to Pale Beige Water Solubi
Products Description Dibasic ester is widely used as lubricants, solvents, plasticizers, additives and spin finishes. It is applied as a coating material for magnet wires, enamel wires, magnetic memory disks, automobiles, coils, cans, sheets and industrial coatings.
Product Details Tara gum offers excellent thermal stability, chemical stability, and colloidal compatibility. It delivers high viscosity at low concentrations and features certain emulsifying and water-retention capabilities. It is a high-performance natural edible gum.
Product Details 9-Fluorenemethanol CAS#24324-17-2 9-Fluorenemethanol (FMOC-OH), a widely used N-protecting reagent, is mainly applied in peptide synthesis. It also serves as a key intermediate in the preparation of deoxynucleoside 9-fluorenemethyl phosphorodithioates.
Products Description of Carboxymethyl celluloseCAS#77-90-7 Acetyl tributyl citrate (ATBC) industrial grade has purity no less than 99%, appears as a colorless clear liquid with a mild fruity scent. Its melting point is −80°C, boiling point is 343°C. Vapor pressure is below 0.01 mmHg at 25°C, relativ
Product Details L(+)-Monosodium glutamate monohydrate#6106-04-3 Sodium glutamate monohydrate typically appears as white to off-white crystals or crystalline powder. It dissolves readily in water, slightly in ethanol, and not in ether. Purity is commonly specified at 98.0%–102.0% by titration; high-p
Products Description This product exists as odourless, tasteless white or pale yellow polymorphous orthorhombic crystals and fine powder. It features outstanding chemical stability under normal ambient storage conditions. Thermal property: Melting point reaches 1580°C; it decomposes above 1600°C and
Products Description Aniline is the most basic primary aromatic amine, formed by replacing one hydrogen atom on benzene with an amino group. It is a colorless, oily, flammable liquid with a strong characteristic odor. It boils at 184 °C, is slightly soluble in water, and dissolves readily in ethanol
Products Description of Acrylic AcidCAS#79-10-7 Product Grade: Industrial Grade Minimum Purity: ≥99% (Tested by GC) Visual Characteristic: Colorless transparent liquid with sharp, strong irritating odor Melting Point: 13.5°C Boiling Point: 141°C Vapor Pressure: 0.4 kPa at 25°C Relative Density: 1.05
Product Details Crystal & Optical Parameters Original crystal structure: Orthorhombic crystal, refractive index = 1.637 Crystal phase transition: Turns into monoclinic crystal when heated to 1149℃, refractive index rises to 1.649 Density & Thermal Index Relative density: 4.5 (measured at 15℃) Meltin
Products Description Pharmaceutical secondary standards used for quality control offer pharmaceutical laboratories and manufacturers a convenient and cost-effective choice instead of preparing internal working standards. ChEBI: A monohydroxyacetophenone with a hydroxy group at the 4' position.
Product Details Fumaric Acid (CAS#110-17-8) is a vital organic chemical raw material and core intermediate for fine chemical manufacturing. It is a primary downstream derivative of maleic anhydride, with broad utilization across food processing, coating production, synthetic resin synthesis and plas
Product Details Melting point 160-163 °C(lit.) Boiling point 400°C density 1.3837 (estimate) vapor pressure 0Pa at 20℃ Fp >100°C storage temp. Inert atmosphere,Room Temperature solubility DMSO (Slightly), Methanol (Slightly) pka 8.74±0.10(Predicted) form powder color White to Pale Beige Water Solubi
Products Description Dibasic ester is widely used as lubricants, solvents, plasticizers, additives and spin finishes. It is applied as a coating material for magnet wires, enamel wires, magnetic memory disks, automobiles, coils, cans, sheets and industrial coatings.
Product Details Tara gum offers excellent thermal stability, chemical stability, and colloidal compatibility. It delivers high viscosity at low concentrations and features certain emulsifying and water-retention capabilities. It is a high-performance natural edible gum.
Product Details 9-Fluorenemethanol CAS#24324-17-2 9-Fluorenemethanol (FMOC-OH), a widely used N-protecting reagent, is mainly applied in peptide synthesis. It also serves as a key intermediate in the preparation of deoxynucleoside 9-fluorenemethyl phosphorodithioates.
Products Description of Carboxymethyl celluloseCAS#77-90-7 Acetyl tributyl citrate (ATBC) industrial grade has purity no less than 99%, appears as a colorless clear liquid with a mild fruity scent. Its melting point is −80°C, boiling point is 343°C. Vapor pressure is below 0.01 mmHg at 25°C, relativ
Product Details L(+)-Monosodium glutamate monohydrate#6106-04-3 Sodium glutamate monohydrate typically appears as white to off-white crystals or crystalline powder. It dissolves readily in water, slightly in ethanol, and not in ether. Purity is commonly specified at 98.0%–102.0% by titration; high-p
Products Description This product exists as odourless, tasteless white or pale yellow polymorphous orthorhombic crystals and fine powder. It features outstanding chemical stability under normal ambient storage conditions. Thermal property: Melting point reaches 1580°C; it decomposes above 1600°C and
Products Description Aniline is the most basic primary aromatic amine, formed by replacing one hydrogen atom on benzene with an amino group. It is a colorless, oily, flammable liquid with a strong characteristic odor. It boils at 184 °C, is slightly soluble in water, and dissolves readily in ethanol
Products Description of Acrylic AcidCAS#79-10-7 Product Grade: Industrial Grade Minimum Purity: ≥99% (Tested by GC) Visual Characteristic: Colorless transparent liquid with sharp, strong irritating odor Melting Point: 13.5°C Boiling Point: 141°C Vapor Pressure: 0.4 kPa at 25°C Relative Density: 1.05
Product Details Crystal & Optical Parameters Original crystal structure: Orthorhombic crystal, refractive index = 1.637 Crystal phase transition: Turns into monoclinic crystal when heated to 1149℃, refractive index rises to 1.649 Density & Thermal Index Relative density: 4.5 (measured at 15℃) Meltin
Products Description Pharmaceutical secondary standards used for quality control offer pharmaceutical laboratories and manufacturers a convenient and cost-effective choice instead of preparing internal working standards. ChEBI: A monohydroxyacetophenone with a hydroxy group at the 4' position.
Product Details Fumaric Acid (CAS#110-17-8) is a vital organic chemical raw material and core intermediate for fine chemical manufacturing. It is a primary downstream derivative of maleic anhydride, with broad utilization across food processing, coating production, synthetic resin synthesis and plas
